Finished projects

A list of master theses uploaded into the DiVA database since 2010 can be obtained using this link:
http://www.physics.uu.se/tk/en/content/master-thesis

In addition, below you can find a list of some earlier master theses:


Matilda Åberg Lindell, August 2010: "Safeguards Licensing Aspects of a Future Generation IV Demonstration Facility - a Case Study"M.Sc. Thesis.
Richard Fridström, June 2010: "Response of the Gamma TIP Detectors in a Nuclear Boiling Water Reactor"M.Sc. Thesis– in collaboration with Westinghouse
Axel Rudling, 2010: "Mechanistic modeling of dryout in fuel assemblies with complex spatial power distribution"M.Sc. Thesis – in collaboration with Westinghouse
Jonas Isaksson, May 2010: "Transientanalys för Forsmark block 2 och 3: Studie av hur val av driftpunkt och pumpreglering påverkar torrkokningsgränsvärdet"
M.Sc. Thesis
– in collaboration with FKA
Viktor Sivertsson, February 2010: "Hydrogen production using high temperature nuclear reactors : A feasibility study"
M.Sc. Thesis
– in collaboration with Vattenfall R&D
Cecilia Larsson, January 2010: "Upgrade and validation of PHX2MCNP for criticality analysis calculations for spent fuel storage pools"
M.Sc. Thesis
– in collaboration with Westinghouse
Mikael Ewing & Mattias Lindgren, 2010: "LCA av en natriumkyld snabbreaktor med avseende på koldioxidutsläpp"
B.Sc. Thesis
Anna Sand, 2009: "Modelling of the Reactor Containment Cooling in OL1 and OL2"
M.Sc. Thesis
– in collaboration with Westinghouse
Henrik Larsson, 2009: "Evaluation of POLCA7’s void prediction performance during start-up conditions"
M.Sc. Thesis
– in collaboration with Westinghouse
Joel Edström, 2009: "Utvärdering av Flowmaster som verktyg för flödestekniska beräkningar"
M.Sc. Thesis
– in collaboration with Westinghouse
Anna-Maria Carstensen, August 2009: "A method for energy analysis using electricity as basis of evaluation applied to a Swedish nuclear power plant"
UPTEC ES 09022
M.Sc. Thesis.
Carolina Brynjell Rakkola, 2009: ”Validation of VIPRE-01 for application to BWR subchannel core thermal hydraulics”
M.Sc. Thesis
– in collaboration with Westinghouse
Mattias Håkansson, June 2009: ”Monte Carlo simulations of proton background in the Medley experiment"
M.Sc. Thesis
Cheuk Wah Lau, May 2009: ”Prerequisites for a future implementation of a closed nuclear fuel cycle in Sweden”
M.Sc. Thesis
– in collaboration with Vattenfall R&D
Gustav Wallin, April 2009: ”Gamma Scanning Software for ORTEC DSPEC Pro”
M.Sc. Thesis
– in collaboration with Westinghouse
Kenny Granath, February 2009: "Feasibility study of a light-weight, transportable equipment for gamma-scanning measurements on nuclear fuel"
M.Sc. Thesis
– in collaboration with Westinghouse
Karen Kvenangen, June 2007: "Alternative Measuring Approaches in Gamma Scanning on Spent Nuclear Fuel"
UU-NF 07#08 M.Sc. Thesis.
Charlotte Lager, April 2007: "Investigation of the Spectroscopic Performance of a Cadmium Telluride Detector Using Pulse Shape Correction and Digital Techniques"
UU-NF 07#07 M.Sc. Thesis.
Karin Holmqvist, May 2006: "Tomographic Reconstruction of the Void Distribution in the Nuclear Fuel Test Loop FRIGG"
M.Sc. Thesis.
Pernilla Andersson, April 2006: "Possibilities to enhance the energy resolution of semiconductor gamma-ray detectors by using Frisch grids"
Project work, get report here
Anni Fritzell, March 2006: "Concerns when designing a safeguards approach for the back-end of the Swedish fuel cycle" M.Sc. Thesis.
Mats Troeng, December 2004: "Positioning of Nuclear Fuel Assemblies by Means of Image Analysis on Tomographic Data" ISV-3/2005 M.Sc. Thesis.
Tobias Lundqvist, August 2004: "Investigation of Algebraic Reconstruction Techniques for Tomographic Measurements on Spent Nuclear Fuel Assemblies" ISV-6/2005 M.Sc. Thesis.
Johan Kilander, May 2002: "Utredning inför omkonstruktion av Pluto - en utrustning för gammatomografi av använt kärnbränsle" ISV-1/2002 M.Sc. Thesis.
Marcus Agåker, January 2001: "Collimator transmission" Project work in the course Modern Experimental Physics Get report here.
Anders Hjalmarsson, April 1998: "Design of a collimator-detector system for tomographic measurement of nuclear fuel, using the Monte Carlo simulation code GEANT" Project work, get report here
Camilla Andersson, 1997: "Possibilities and Limitations of the Tomographic Method for verification of the Integrity of Spent Nuclear Fuel" ISV-1/1998 M.Sc. Thesis.
Staffan Jacobsson, August 1996: "Theoretical investigations of tomographic methods used for determination of the integrity of spent BWR nuclear fuel" UPTEC 96 115E, ISSN 0346-8887 ISV-6/1997 M.Sc. Thesis.
Jonas Bäckman, March 1996: "Improvements of the spectroscopic performance for a 2 mm thick Cadmium Telluride detector" M.Sc. Thesis.
Peter Jansson, February 1996: "Determination of the Residual Thermal Power in Spent Nuclear Fuel from Gamma-Ray Measurements" ISV-4/1997 M.Sc. Thesis.
Hans Palmgren, June 1995: "A Software Package for Evaluation and Simulation of Tomographic data from Spent Nuclear Fuel Assenblies"
B. Brienen, R. Cortenraad: "Resolution improvement of a Cadmium Telluride detector" VDF/NK 94-29
Ricardo Yanez, 1990: "A Cadmium Telluride (CdTe) Detector"
Peter B.R. Björkholm and Anna T. Dyring, January 1990: "A Study of a High Rate Gamma-Spectrometer System for burnup measurements" UPTEC 90 015E, ISSN 0346-8887

Bilaga	Storlek
UUNF07-07.pdf	1.49 MB
UUNF07-08.pdf	581.37 kB
isvint_12002.pdf	385.06 kB
PernillaAndersson_April2006.pdf	83.68 kB
AndersHjalmarssonProjekt_April1998.pdf	342.2 kB
CamillaAndersson_97.pdf	504.57 kB
isvint697.pdf	575.66 kB
isv_4_1997.pdf	643.99 kB
Anna-Maria Carstensen_2010.pdf	346.7 kB
Karins rapport.pdf	794.08 kB
Agaker_rapport.pdf	518.13 kB
isvint_22005.pdf	1.58 MB
isvint_32005.pdf	1.93 MB

Institutionen för fysik och astronomi

Meny